#------------------------------------------------------------------------
# -*- mode: cmake -*-
#------------------------------------------------------------------------
#
# LDASTools Frame Utilities - A library to extend manipulation of LIGO/Virgo Frame
# Files
#
# Copyright (C) 2018 California Institute of Technology
#
# LDASTools Frame Utilities is free software; you may redistribute it and/or
# modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 (GPLv2) of the
# License or at your discretion, any later version.
#
# LDASTools Frame Utilities is distributed in the hope that it will be useful, but
# without any warranty or even the implied warranty of merchantability
# or fitness for a particular purpose. See the GNU General Public
# License (GPLv2) for more details.
#
# Neither the names of the California Institute of Technology (Caltech),
# The Massachusetts Institute of Technology (M.I.T), The Laser
# Interferometer Gravitational-Wave Observatory (LIGO), nor the names
# of its contributors may be used to endorse or promote products derived
# from this software without specific prior written permission.
#
# You should have received a copy of the licensing terms for this
# software included in the file LICENSE located in the top-level
# directory of this package. If you did not, you can view a copy at
# http://dcc.ligo.org/M1500244/LICENSE
#
#------------------------------------------------------------------------

cmake_minimum_required(VERSION 3.12...4.0)

set( LDAS_TOOLS_FRAMEAPI_SWIG_PACKAGE_NAME ldas-tools-frameAPI-swig )
set( LDAS_TOOLS_FRAMEAPI_SWIG_VERSION      2.6.15 )

set(
  PROJECT_DESCRIPTION
  "SWIG bindings for LDAS Tools frame utility library"
  )

set(
  PROJECT_DESCRIPTION_LONG
  "This provides the swig files for the LDAS frame utility interface"
  )

set( LDAS_TOOLS_SWIG_VERSION          3.0.7 )
set( LDAS_TOOLS_CMAKE_VERSION         1.3.1 )
set( LDAS_TOOLS_AL_VERSION            2.7.0 )
set( LDAS_TOOLS_FRAMECPP_VERSION      3.0.5 )
set( LDAS_TOOLS_LDASGEN_VERSION       2.7.4 )
set( LDAS_TOOLS_FILTERS_VERSION       2.6.7 )
set( LDAS_TOOLS_AL_SWIG_VERSION       2.6.11 )
set( LDAS_TOOLS_FRAMECPP_SWIG_VERSION 3.0.2 )
set( LDAS_TOOLS_LDASGEN_SWIG_VERSION  2.6.12 )
set( LDAS_TOOLS_FRAMEAPI_VERSION      2.6.6 )
set( BOOST_MINIMUM_VERSION            1.67 )
#------------------------------------------------------------------------
# Configuration variables
#------------------------------------------------------------------------

#------------------------------------------------------------------------

if (NOT "${CMAKE_CXX_STANDARD}")
  set(CMAKE_CXX_STANDARD 17)
endif( )
set(CMAKE_CXX_STANDARD_REQUIRED YES)
set(CMAKE_CXX_EXTENSIONS NO)

#------------------------------------------------------------------------
#
#------------------------------------------------------------------------

project( ${LDAS_TOOLS_FRAMEAPI_SWIG_PACKAGE_NAME}
  VERSION ${LDAS_TOOLS_FRAMEAPI_SWIG_VERSION}
  DESCRIPTION "${PROJECT_DESCRIPTION}"
)

#------------------------------------------------------------------------
# Locate the standard LDAS Tools cmake macro directory
#------------------------------------------------------------------------

find_package(
  LDASToolsCMake
  CONFIG
  REQUIRED
  HINTS ${CMAKE_INSTALL_PREFIX}/share/ldas-tools/cmake/Modules
  )

#========================================================================
# Start pulling in the LDAS Tools macros for easy setup
#========================================================================

find_package(AxLDASTools)

set(PROJECT_BASENAME ldas-tools-frameAPI)

cm_init(
  ${LDAS_TOOLS_FRAMEAPI_SWIG_PACKAGE_NAME}
  "${LDAS_TOOLS_FRAMEAPI_SWIG_VERSION}"
  ${LDAS_TOOLS_BUG_REPORT_URL}
  ${LDAS_TOOLS_FRAMEAPI_SWIG_PACKAGE_NAME}
  ${LDAS_TOOLS_HOMEPAGE_URL}
  DESCRIPTION "${PROJECT_DESCRIPTION}"
  )

set( PROJECT_CONFIG_PATH "${PROJECT_SOURCE_DIR}/config" )

set( PROJECT_CONFIG_FILENAME
  "${CMAKE_CURRENT_BINARY_DIR}/common/frameutils_swig_config.h" )

ch_top(
    "#ifndef FRAMEUTILS_SWIG_CONFIG_H"
    "#define FRAMEUTILS_SWIG_CONFIG_H"
    " "
)
ch_bottom(
    " "
    "#endif /* FRAMEUTILS_SWIG_CONFIG_H */"
)

cx_scheme_sanitizer(
  ALLOW_WARNINGS
  ENABLE_ASAN
  ENABLE_USE_AFTER_SCOPE
  DISABLE_DETECT_ODR_VIOLATION
  DISABLE_RECOVERY_ASAN
  SUPPRESSION_FILE_ASAN ${CMAKE_SOURCE_DIR}/asan_suppressions.txt
  ENABLE_LSAN
  DISABLE_RECOVERY_LSAN
  SUPPRESSION_FILE_LSAN ${CMAKE_SOURCE_DIR}/lsan_suppressions.txt
  ENABLE_MSAN
  DISABLE_RECOVERY_MSAN
  SUPPRESSION_FILE_MSAN ${CMAKE_SOURCE_DIR}/msan_suppressions.txt
  ENABLE_TSAN
  DISABLE_RECOVERY_TSAN
  SUPPRESSION_FILE_TSAN ${CMAKE_SOURCE_DIR}/tsan_suppressions.txt
  ENABLE_UBSAN
  DISABLE_RECOVERY_UBSAN
  SUPPRESSION_FILE_UBSAN ${CMAKE_SOURCE_DIR}/ubsan_suppressions.txt
)

cx_check_compile_hardening( )
# cx_cxx_warnings_as_errors( Debug )

#=======================================================================
# Check for key programs
#=======================================================================

find_package(SWIG 2.0.4 REQUIRED)
include(${SWIG_USE_FILE})

if( NOT ENABLE_DOCUMENTATION_ONLY )
  cm_pkg_check_modules(
    PREFIX LDASTOOLS
    REQUIRED
    MODULES
      ldastools-ldasframe>=${LDAS_TOOLS_FRAMEAPI_VERSION}
    )
endif( )

add_custom_target( doc )

#========================================================================
# Traverse the tree
#========================================================================

add_subdirectory(common)
add_subdirectory(python)

#========================================================================
# Commit configuration information to the file
#========================================================================

cm_config_headers( ${PROJECT_CONFIG_FILENAME} )

#========================================================================
# Installation of key files
#========================================================================

install(CODE "MESSAGE(\"TODO: Need to expand install.\")")

#========================================================================
# Prepare the distribution
#========================================================================

cx_cpack(
  MACPORTS_CATEGORY science
  SUBPORTS
    py27-${PROJECT_BASENAME}
    py35-${PROJECT_BASENAME}
    py36-${PROJECT_BASENAME}
    py37-${PROJECT_BASENAME}
    py38-${PROJECT_BASENAME}
  )

#========================================================================
# Report configuration information
#  CMAKE_MAKE_PROGRAM:FILEPATH
#========================================================================
cm_msg_notice( "=========================================================" )
cm_msg_notice( " Project ${PROJECT_NAME} has now ben successfully configured:" )
cm_msg_notice( " " )
cm_msg_notice( " Python settings:" )
cm_msg_notice( "      PYTHON3                        ${PYTHON3_EXECUTABLE}" )
cm_msg_notice( "      PYTHON3_VERSION_STRING         ${PYTHON3_VERSION_STRING}" )
cm_msg_notice( "      PYTHON3_LIBRARIES              ${PYTHON3_LIBRARIES}" )
cm_msg_notice( "      PYTHON3LIBS_VERSION_STRING     ${PYTHON3LIBS_VERSION_STRING}" )
cm_msg_notice( " " )
cm_msg_notice( " installation directories:" )
cm_msg_notice( "      CMAKE_INSTALL_BINDIR           ${CMAKE_INSTALL_BINDIR}" )
cm_msg_notice( "      CMAKE_INSTALL_DATADIR          ${CMAKE_INSTALL_DATADIR}" )
cm_msg_notice( " " )
cm_msg_notice( "  Sanitizers:" )
cm_msg_notice( "      Active:                         ${CX_SCHEME_SANITIZERS_ACTIVE}" )
cm_msg_notice( " " )
cm_msg_notice( "  Now run 'cmake --build .' to build ${PROJECT_NAME}" )
cm_msg_notice( "  and run 'cpack' to package ${PROJECT_NAME}" )
cm_msg_notice( "=========================================================" )
